Natural Flocculant for Large Pools - 20 Treatments
100% natural flocculant for large pools in a 20-treatment bucket. Restores clarity to the water in plastered pools and spa systems, without aluminum sulfate and without altering the pH. 💧
🏊 For large volumes: treatments calculated for a 50 m³ pool.
🌫️ Clarifies overnight: precipitates turbidity to the bottom so it can be removed with the pool vacuum.
🛡️ No aluminum or sulfates: safe for families, sensitive skin, and pets.
🧂 Universal: chlorine, salt, any filter. Dosing cup included.
Frequently bought together
Flocculant for Large Pools · Bucket of 20 Treatments
Natural Flocculant for Large Pools: Bucket of 20 Treatments
In a large in-ground pool, cloudiness is immediately noticeable: the water loses its sparkle, the bottom becomes blurred, and the feeling of cleanliness disappears. The Puerto Verde natural flocculant for large pools gathers suspended particles and deposits them at the bottom, ready for the pool vacuum. This bucket of 20 treatments, with a 100% natural formula and no aluminum sulfate, is designed for large family pools, residential complexes, and spa circuits.
- 🌿 100% natural
- ✓ No aluminum sulfate
- 🏊 Large pools
- 💧 Maintains pH
- 🧂 Chlorine and salt
Attention: it is not a treatment for green water
The larger the pool, the more expensive it is to choose the wrong product. That is why we clarify it from the beginning: this flocculant is a clarifier. It removes cloudiness, but does not remove algae, and therefore does not turn green water into crystal-clear water.
- Removes cloudiness from large volumes of water.
- Concentrates fine dirt at the bottom of the pool.
- Helps restore sparkle after rain or intensive use.
- It is not an algaecide nor does it remove green algae.
- It does not clear green water on its own.
- It does not replace disinfection or pH and alkalinity control.
Green water in the pool? First, algae are removed and the water is balanced; only then, with the green algae already dealt with, does the flocculant remove residual cloudiness. We explain it in detail on the pool blog.
How it works
A solution designed for large volumes of water
In large pools, the particles responsible for cloudiness are spread throughout a huge volume of water, and the filter cannot keep up with retaining them. The flocculant in granular powder is distributed with the filtration system running, binds those particles into heavier aggregates, and, when the water is left to rest, makes them sink to the bottom. A pass with the pool vacuum completes the job.
It is distributed
With the filtration system running.
It aggregates
Fine particles into heavy aggregates.
It settles
At rest, everything falls to the bottom.
It is vacuumed
With the pool vacuum or robot.
Without aluminum
Clarifying without aluminum sulfate
Most conventional flocculants rely on aluminum sulfate. The Puerto Verde flocculant, on the other hand, is 100% natural and is free of aluminum and sulfates. Its handling is safe and it is suitable for pools shared by the whole family, including people with sensitive skin or chemical sensitivity, and for homes with animals. It fits perfectly into the maintenance of an ecological pool.
- 🌿 Natural formula
- ✓ 0% aluminum
- 🛡️ Sensitive skin
- 🐶 Animals
- 💧 Stable pH
- ⚡ Fast action
Facilities
What pools it is designed for
In-ground pools
Family and large volume.
Communities
Neighborhood pool complexes.
Heated
Indoor and covered.
Spa circuits
With a recirculation system.
Saltwater pools
With a salt chlorinator.
It works with chlorine and salt chlorination, and with sand, cartridge, and Aqualoon filters. The only requirement: a functioning recirculation system.
Dosage
Dosage for large pools and spa circuits
Add 2 scoops for every 10 m³ of water. In a 50 m³ pool, the reference volume for this format, each treatment requires 10 scoops.
Reference: 2 scoops for every 10 m³. The 20 treatments in the bucket are calculated based on a 50 m³ pool.
Calculator
How many m³ is your pool? Calculate the volume and the exact dosage in seconds.
Directions for use
Application in five steps
Before starting, check that the recirculation is working correctly and that the water is below 30 °C. In large pools, early morning or the first hours of the day are the best time.
-
Calculate according to volume
Apply 2 scoops for every 10 m³. In a 50 m³ pool, 10 scoops.
🥄 10 scoops / 50 m³ -
Distribute throughout the pool
With the filtration system on, pour the dosage little by little in front of the return jets and around the entire perimeter. In large pools, distribute the product at several points.
🔄 Recirculation running -
Keep the recirculation running
Leave the filtration system running for at least 2 hours to homogenize the product throughout the entire volume.
⏱️ Minimum 2 h -
Leave the water to rest
Turn off the filtration system and let it rest for 8 to 12 hours, depending on the level of dirt.
🌙 8-12 h of rest -
Remove the sediment
Pass the pool vacuum or the robot to collect the dirt from the bottom, clean the filter and reactivate the filtration. Repeat weekly or when the water requires it.
🧹 Pool vacuum📅 Every week
Water balance
The natural range for your pool maintenance
In large pools, correcting an imbalance costs more product and more time. That is why it is advisable to monitor alkalinity: with an optimal alkalinity, approximately between 80 and 120 ppm, the pH remains stable, the water resists changes better, and the flocculant works under the best conditions.
Formats
The entire range of natural flocculant
For large volume in-ground pools, you also have the 32 and 64 treatment formats in the flocculant for large pools collection. If your pool is above ground or has few m³, consult the flocculant for small pools.
Technical sheet
The natural flocculant for large pools is also available on Amazon.
Buy Natural Flocculant for Large Pools on Amazon
